< Fields Coatings & Mastics 700 to SW Series

Product Information Sheet
A920 AtcoSeal
Asphalt Pavement Sealer

USES: A920 AtcoSeal protects asphalt roadways, driveways, parking areas, playgrounds, sport courts, and other similar paved areas. AtcoSeal is also applied so as to beautify asphalt pavements with a rich, black surface color. AtcoSeal can be applied over asphalt aggregate patches after they have set up. AtcoSeal provides a skid resistant surface, and replenishes the asphalt particles that are lost due to oxidation and erosion. Furthermore, AtcoSeal improves drainage by forming a smooth surface, making it easier to sweep and clean with water.

DIRECTIONS: A920 AtcoSeal is friendly to apply, especially in warm, dry conditions. AtcoSeal sets up in approximately 1 to 4 hours, depending on weather conditions. Apply with a squeegee or medium stiff bristle brush. Do not apply AtcoSeal if rain or excessive humidity is imminent either during or immediately following application; or if the outside temperature is below 50° F. Clean gravel, dirt, vegetation, and debris from the application area. Clean oil and gas spots and prime with A940 OilSpot. Fill cracks between .25" and 1.0" with A910 RubrFilr. Clean and fill potholes in the asphalt pavement with A950 AtcoPatch. Apply AtcoSeal directly from the container without diluting. Thoroughly mix AtcoSeal just prior to application. Apply AtcoSeal in two layers at the uniform rate of 1.5 gallons per 100 square feet per layer, totaling 3 gallons per 100 square feet for the entire application. For a premium installation, apply the second layer perpendicular to the first layer. The actual rate of application will depend upon the condition of the asphalt pavement surface being coated. Allow a minimum of 24 hours to dry before traffic is permitted over the AtcoSeal. Before releasing traffic, test the AtcoSeal to confirm that it has adequately set up.

DESCRIPTION: A920 AtcoSeal is a quality, high solids emulsified asphalt manufactured from 100% commercial paving grade asphalt. AtcoSeal has been engineered to provide a premium seal coating that protects asphalt pavements from the degrading effects of the environment. AtcoSeal also provides superior elastic performance against thermal shock, the daily expansion and contraction of a pavement caused by temperature changes. Additionally, AtcoSeal protects asphalt pavements from the sun's destructive UV rays. AtcoSeal is your best defense from the elements. With AtcoSeal your asphalt pavements will perform much longer.

SPECIFICATIONS: A920 AtcoSeal exceeds the standards of the American Society for Testing and Materials: ASTM D 2939. Maximum VOC O grams per liter.

PACKAGING: A920 AtcoSeal is available in 5 gallon pails, and 55 gallon drums.

TECHNICAL INFORMATION:
Approximate Pounds Per Gallon 9.3
Minimum Percent Nonvolatile Weight 25
Approximate Hours Set Up Time to the Touch 24
Optimum Application Temperature Range in deg. F 50 to 100
Application Consistency Brush or Spray

RECOMMENDED APPLICATION RATE PER 100 SQUARE FEET: N/A

A920 MSDS >

About Fields | Services | Product Guide | Advertising | BUR Systems

Copyright © 2003 Fields Company, LLC. All rights reserved.